20kg.cm digital rc servo for rc car buggy truck truggy bajas
20kg.cm digital servo rc serco
steering for rc baja rc car rc truck rc buggy
100% new,good quality,well performance
|Voltage:||6V ~ 7.2V|
|Speed:||0.18 sec/60deg (6v) 0.16sec/60deg (7.2v)|
|stall Torque:||17.8kg.cm (6v) 21.5kg.cm (7.2v)|
the servo work as normal servos,but what need care is the
power,this is high torque servo,need 6-7.2V 2-4A current,normal receiver 5V 1A is not enough,please check your power when you use it,thanks
1,We offer JR plug for you,for it is compatible with Futaba plug.
2,Please do read the instruction before you install the
servo.Rubber grommet must be used to reduce vibration when you
install the servo on GP airplane,GP car or GP boat.
3,Please choose suitable servo for you rc model.Torque overload
will damage your servo.
4,Keep the servo clean and away from dust,corrosive gas and humid
5,Please choose correct power voltage and make sure the current
6,Specification are subject to change without notice
Packing include :
Accessaries:servo horns,rubber grommets, eyelets and mounting